BY GOING THROUGH YOU WILL GET TO KNOW THE VARIOUS PART OF PURIFIER ALSO
1.THE VARIOUS PARTS INCLUDES
2.THE STEPS FOR OVERHAULING ARE AS FOLLOWS;
1.Isolate the purifier first.
2. remove the hoses which is connected to the connecting housing.
3.Now remove the connecting housing.
4. REMOVING THE SPRING AND ARM (act as a gravity disc) FROM THE PAIRING TUBE.
5. TURN THE PAIRING TUBE SO THAT FRAME HOOD CAN BE REMOVED UPWARD AND THEN REMOVE FRAME HOOD.
6.NOW OVERHAULING BOWL.REMOVE THE LOCK RING WHICH LOCKS THE BOWL HOOD TO THE BOWL BODY BY CLAMP TOOL.
6 REMOVING THE BOWL HOOD.
7.REMOVING INLET /OUTLET PARING PIPE TOGETHER WITH TOP DISC.
8.REMOVING THE PAIRING TUBE.
9.NOW REMOVING THE DISC STACK AND DISTRIBUTOR.
10.USE T SPANNER TO REMOVE THE NUT WHICH LOCKS THE DISCHARGE SLIDE TO THE BOWL BODY.
11. NOW REMOVING DISCHARGE SLIDE.
12.NOW REMOVING BOWL BODY BY REMOVING THE CAP NUT ON TOP.
1.THE VARIOUS PARTS INCLUDES
2.THE STEPS FOR OVERHAULING ARE AS FOLLOWS;
1.Isolate the purifier first.
2. remove the hoses which is connected to the connecting housing.
3.Now remove the connecting housing.
4. REMOVING THE SPRING AND ARM (act as a gravity disc) FROM THE PAIRING TUBE.
5. TURN THE PAIRING TUBE SO THAT FRAME HOOD CAN BE REMOVED UPWARD AND THEN REMOVE FRAME HOOD.
6.NOW OVERHAULING BOWL.REMOVE THE LOCK RING WHICH LOCKS THE BOWL HOOD TO THE BOWL BODY BY CLAMP TOOL.
6 REMOVING THE BOWL HOOD.
8.REMOVING THE PAIRING TUBE.
9.NOW REMOVING THE DISC STACK AND DISTRIBUTOR.
10.USE T SPANNER TO REMOVE THE NUT WHICH LOCKS THE DISCHARGE SLIDE TO THE BOWL BODY.
11. NOW REMOVING DISCHARGE SLIDE.
14. TURN THE BOWL BODY UPSIDE DOWN AND AND THEN REMOVE THE OPERATING SLIDE
No comments:
Post a Comment