INTERNATIONAL SHORE CONNECTION
=International shore coupling solas chapter 2 .2 regulation 19 says for 500 GT and upward must have at least one ISC. The connection should be made of steel or other suitable material and shall be designed for 1 Newton per mm square services .
=The flange should have flat surfae on one side and another side should be permanently connected or attached to the coupling which can be easily fitted to ship hydrant and hose connection.
= the four bolts 16 mm 50 mm in length and 8 washers ,gasketed to be available so that the connection can be readily used in case of emergency situation.
=ISC shall be clearly marked
=The velocity of water supplied by the port or other ship to the effected ship should not exceed 5m/s in the the fire water distribution network.
= The fitting and joint must be suitable for working pressue of atleast 10.5 bar.
= inner dia -64mm
outer dia -178 mm
pitch circle dia-132mm
================================================================================================
=International shore coupling solas chapter 2 .2 regulation 19 says for 500 GT and upward must have at least one ISC. The connection should be made of steel or other suitable material and shall be designed for 1 Newton per mm square services .
=The flange should have flat surfae on one side and another side should be permanently connected or attached to the coupling which can be easily fitted to ship hydrant and hose connection.
= the four bolts 16 mm 50 mm in length and 8 washers ,gasketed to be available so that the connection can be readily used in case of emergency situation.
=ISC shall be clearly marked
=The velocity of water supplied by the port or other ship to the effected ship should not exceed 5m/s in the the fire water distribution network.
= The fitting and joint must be suitable for working pressue of atleast 10.5 bar.
= inner dia -64mm
outer dia -178 mm
pitch circle dia-132mm
================================================================================================
No comments:
Post a Comment